Wiki Home Settings page Power on interval

Power on interval

2025-10-17
power, on, boot, interval

The following instructions explain how to set a time interval (in seconds) when booting a batch of PCs.

  1. Go to the Settings page, then Client Settings, and find the Power On Interval option.
  2. Enter the desired time in seconds in the box next to it.(Figure 1)

Figure 1

  1. If you set the interval to 1 second, each PC will boot 1 second after the previous one.
    For example, if you boot 20 PCs at the same time, each will start 1 second apart from the next.
  2. This function helps reduce the load on the network switch when booting multiple PCs simultaneously, improving the success rate of starting a large number of PCs at once.

Related: